Brake Pedal Assy: Adjustments

BRAKE PEDAL FREE HEIGHT ADJUSTMENT





Height of brake pedal is normal if it is about 8 mm (0.3 inch) lower than clutch pedal.
1. When booster push rod clevis has been reinstalled, it is important that measurement between booster mounting surface and center of clevis pin hole is adjusted.
Length "a": 99.5 - 100.5 mm (3.92 - 3.96 inch)
Tightening Torque (a): 25 Nm (2.5 kg.m, 18.0 ft. lbs.)
2. When stop light switch has been removed, refer to the following STOP LIGHT SWITCH ADJUSTMENT for proper installation. Services in above steps 1) and 2) may affect brake pedal height.