DTC Confirmation Test
- Ensure intake air temperature is 6.8-158°F (-14-70°C), vehicle is at an altitude of 9150 feet or below, and barometric pressure is 74 kPa or more. Ensure DTCs P0101, P0102, P0103, P0116, P0117 , P0118, P0122, P0123, P0335 and P1451 are not set. Turn ignition off, connect scan tool and turn ignition on. Clear DTCs. See MALFUNCTION INDICATOR LIGHT (MIL) RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article.
- Start engine and allow it to reach normal operating temperature. Drive vehicle with engine speed at 3300-3700 RPM for 10 seconds. Stop vehicle and allow engine to idle for 10 seconds. Check for DTC P0121. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article.