A/T Throttle Cable
A/T THROTTLE CABLEAdjustment (G16/J20)
1. Check clearance "c". If it is out of specifications, adjust it by turning cable adjusting nut.
Clearance "c": 0.8 - 1.5 mm (0.03 - 0.06 inch)
2. Tighten lock nut securely.
Adjustment (H25)
1. Warm up engine and transmission to normal operating temperature.
2. Make sure that accelerator cable is adjusted as specified.
3. With throttle valve closed, check clearance "c" which should be within the following specification.
Clearance "c": 0.8 - 1.5 mm (0.03 - 0.06 inch)
If it is out of specification, adjust it by turning cable adjusting nut.