Road Test

Engine and transmission must be at normal operating temperature. Road test vehicle with selector lever in "D" position. Ensure all upshifts and downshifts occur at specified shift points. See SHIFT POINT SPECIFICATIONS table.
Ensure lock-up occurs at appropriate speeds. See LOCK-UP SPEED SPECIFICATIONS table. Lightly depress accelerator pedal. If excessive increase in engine RPM is present, lock-up will not occur.
Check for shock and slippage at all upshifts. Check for abnormal noise and vibration. While driving in "D", "2" and "L" ranges, ensure speeds at OD-3, 3-2 and 2-1 kickdown are within specification. Check for shock and slippage at kickdown.

SHIFT POINT SPECIFICATIONS

LOCK-UP SPEED SPECIFICATIONS

Application

MPH

Lock-Up On

3rd ⁽¹⁾

OD ⁽²⁾

Lock-Up Off

3rd ⁽¹⁾

OD ⁽²⁾

⁽¹⁾	With selector lever in "D" position and throttle angle 8-18 percent.

⁽²⁾	With selector lever in "D" position and throttle angle 0-18 percent.