Fuel Pressure Pulsation Damper: Service and Repair

REMOVAL
1. Relieve fuel pressure.
2. Disconnect negative cable at battery.




3. Remove damper from delivery pipe.
Use backup wrench when loosening.

CAUTION: A small amount of fuel may be released when damper is removed. In order to reduce the chance of personal injury or fire, cover damper with a shop cloth and place it in an approved container.

INSTALLATION




For installation, reverse removal procedure and note the following precautions.
- Make sure to use new gaskets and apply thin coat of engine oil to them.
- Using backup wrench, tighten damper to specified torque.

Tightening Torque
(a): 30 Nm (3.0 kg-m, 22.0 lb-ft)

- With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.