Rear

WHEEL DISC, NUT & BEARING CHECK
^ Inspect each wheel disc for dents, distortion and cracks. A disc in badly damaged condition must be replaced.
^ Check wheel (hub) nuts for tightness and, as necessary, retighten to specification.





^ Check wheel bearings for wear. When measuring thrust play, apply a dial gauge to spindle cap center or rear wheel hub.
Thrust play limit: 0.3 mm (0.012 inch)
When measurement exceeds limit and spindle nut is tightened to specified torque, replace bearing.





^ By rotating wheel actually, check wheel bearing for noise and smooth rotation. If it is defective, replace bearing.