Fail-Safe Mode
WARNING: This page is about a different variant/trim than selected.
TCM substitutes fail-safe values when various input or output devices are malfunctioning. See FAIL-SAFE VALUE IDENTIFICATION table.
FAIL-SAFE VALUE IDENTIFICATION
| DTC (OBD-II/Flash Code) | Description | Fail-Safe Value | ||
|---|---|---|---|---|
| P0705 (34) | Transmission Range Sensor Signal Missing | "D" Range Substituted, TCC Solenoid Off | ||
| P0705 (34) | Multiple Transmission Range Sensor Signals | Priority Given To Gear Selections As Follows: "N", "R", "L", "2", "D" | ||
| P0715 (37) | Forward Clutch Cylinder Sensor Malfunction | Shift Solenoids Off, TCC Solenoid Off, Reverse Inhibit Control Off (1) | ||
| P0720 (31) | VSS Circuit Malfunction | Shift Solenoids Off, TCC Solenoid Off, Reverse Inhibit Control Off (1) | ||
| P0745 (41/42) | Pressure Control Solenoid Malfunction | Power Supply For All Solenoids Off | ||
| P0753 (21/22) | Shift Solenoid No.1 | Power Supply For All Solenoids Off | ||
| P0758 (23/24) | Shift Solenoid No. 2 | Power Supply For All Solenoids Off | ||
| P0743 (25/26) | TCC Solenoid Circuit Failure | TCC Solenoid Off | ||
| P1700 (32/33) | TP Sensor Input Malfunction | Shift Solenoids Off, TCC Solenoid Off, Pressure Control Solenoid Fully On | ||
| P1705 (51) | ECT Input Malfunction | TCM Assumes Engine Coolant Temperature Is 122°F (50°C) Or More | ||
|
||||