Transmission Speed Sensor: Service and Repair

REMOVAL
1. Disconnect negative cable at battery.
2. Disconnect forward clutch cylinder revolution sensor coupler.





3. Remove forward clutch cylinder revolution sensor by removing its bolt.

INSTALLATION
1. Apply A/T fluid to forward clutch cylinder revolution sensor O-ring.





2. Install forward clutch cylinder revolution sensor to A/T case and tighten bolt to specified torque.
Tightening Torque
(a): 5.5 Nm (0.55 kg.m, 4.0 ft. lbs.)
3. Connect forward clutch cylinder revolution sensor coupler to forward clutch cylinder revolution sensor.
4. Connect negative cable to battery.