Cylinder Block Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| 1.3L | ||||||
| Cylinder Bore | ||||||
| Standard Diameter (1) | ||||||
| "1" | 2.9138-2.9142 (74.011-74.021) | |||||
| "2" | 2.9134-2.9138 (74.000-74.011) | |||||
| Maximum Taper | .0039 (.10) | |||||
| MOut-Of-Round | .0039 (.10) | |||||
| Maximum Deck Warpage | .002 (.051) | |||||
| 1.6L | ||||||
| Cylinder Bore | ||||||
| Standard Diameter (1) | ||||||
| "1" | 2.9531-2.9535 (75.009-75.019) | |||||
| "2" | 2.9528-2.9531 (75.001-75.009) | |||||
| Maximum Taper | .0039 (.10) | |||||
| Maximum Out-Of-Round | .0039 (.10) | |||||
| Maximum Deck Warpage | .002 (.051) | |||||
|
||||||