Power Mirror Motor
Remove garnish molding for access to power mirror electrical connector. See Fig 1 . It may be necessary to remove mirror from door for access to electrical connector. Disconnect power mirror harness electrical connector. Using 12-volt power source, connect positive and negative leads to specified terminals. See Fig 2 or Fig 3 . See POWER MIRROR MOTOR CONTINUITY table. If power mirror motor does not operate as specified, replace power mirror assembly. See POWER MIRROR under REMOVAL & INSTALLATION.
POWER MIRROR MOTOR CONTINUITY
| Apply 12 Volts To Terminal No. | Ground Terminal No. | Mirror Operation |
|---|---|---|
| 1 | 3 | Up |
| 3 | 1 | Down |
| 2 | 3 | Left |
| 3 | 2 | Right |