Control Assembly: Testing and Inspection

Mode Control Switch
^ Check if continuity exists between each pair of terminals listed when mode control button is pressed.
^ With battery voltage (+) connected to terminal "I" and (-) to terminal "F", press each mode control button and check if indicator lamp lights.
^ With battery voltage (+) connected to terminal "A" and (-) to terminal "H", check if illumination lamp lights.

A/C Switch (if equipped)
^ Press A/C button and check if there is continuity between terminals "D" and "G".
^ With battery voltage (+) connected to terminal "K" and (-) to terminal "D", press A/C button and check if indicator lamp lights.