Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Bearing Set Shim Clearance | .0032-.0047 (.081-.119) | |
| Differential Side Gear End Play | ||
| Standard | .002-.013 (.05-.33) | |
| Minimum | .002 (.05) | |
| High/Low Speed Gear Shift Fork-To-Synchronizer Sleeve Clearance (Maximum) | .039 (1.00) | |
| High Speed Locating Spring Length | ||
| Standard | 1.578 (40.10) | |
| Minimum | 1.535 (39.00) | |
| Low Speed & 5th Speed Locating Spring Length | ||
| Standard | 1.028 (26.10) | |
| Minimum | .984 (25.00) | |
| Reverse Gear Shift Lever-To-Idler Shaft Clearance | .20 (5.0) | |
| Synchronizer Ring-To-Gear Clearance | .039-055 (1.00-1.40) | |