LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1999 >> Swift Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul - ECC/MX1/M60 >> Component Disassembly & Reassembly >> Direct Clutch >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Direct Clutch: Reassembly

  1. Apply ATF to new inner seal and install in clutch drum. Apply ATF to new outer seal and install on piston. Carefully install piston into clutch drum.
  2. Install clutch return spring and seat. Compress return springs using spring compressor and an arbor press. Install snap ring. Ensure snap ring is securely fitted in 4 projections of spring seat.
  3. Install in order: plate, disc, plate, plate, disc and flange. Install clutch plate snap ring. Measure height between snap ring and clutch flange. See Figure. Standard clearance should be .098-.120" (2.49-3.05 mm). If height is not within specification, replace flange. Flange is available in 2 thicknesses: .118" (3.00 mm) and .133" (3.38 mm). Check piston for proper movement by applying low compressed air through oil hole in clutch drum.
scientia non olet · About LEMON Manuals