LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1999 >> Swift Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Blower Motor Resistor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Motor Resistor

  1. Blower resistor is mounted in front lower blower motor housing, on right side of instrument panel. Disconnect wiring harness from resistor.
  2. Check for continuity between terminal No. 2 (Pink wire) and terminal No. 4 (Pink/Black wire). Check for continuity between terminal No. 2 (Pink wire) and terminal No. 3 (Pink/Green wire). Check for continuity between terminal No. 2 (Pink wire) and terminal No. 1 (Pink/Blue wire). Continuity should exist in all cases. If continuity is not as specified, replace blower motor resistor.
scientia non olet · About LEMON Manuals