LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1999 >> Swift Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> PANASONIC Rotary Vane >> Thermal Protector >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Thermal Protector: Installation

  1. Ensure thermal protector "O" ring groove in compressor head cover is free of foreign material. Apply refrigerant oil to "O" ring and install into "O" ring groove. Install thermal protector with wiring harness leads horizontal to head cover. Install thermal protector snap ring with chamfered edge facing thermal protector.
  2. Apply refrigerant oil to head cover lower "O" ring and install with top side faces upward. Apply clean refrigerant oil to rear "O" ring and install in head cover. Carefully install head cover onto compressor. Tighten 2 rear head cover bolts to 115-159 INCH lbs. (13-18 N.m). Tighten 4 lower head cover bolts to 80-106 INCH lbs. (9-12 N.m) in a diagonal pattern.
Fig 1: Exploded View Of Compressor (Panasonic)
G98A04102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals