Disabling System (RX300)
- Obtain radio anti-theft protection code from vehicle owner and record preset radio frequencies before disconnecting battery.
- Place front wheels in straight-ahead position. Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 SECONDS before working on vehicle.
- Disconnect driver-side air bag module connector located under steering column, near combination switch connector.
- Using screwdriver, pry out glove box door finish plate. Unplug passenger-side air bag module Yellow 2-pin connector located in upper right side of glove box opening. Air bag connector terminals are automatically shorted together.
- Disconnect left and right side air bag module Yellow 2-pin connectors located under each front seat. Disconnect left and right seat belt pretensioner Yellow 2-pin connectors located behind center pillar lower trim plates. Air bag connector terminals are automatically shorted together. See Figure.