Disabling System (LX470)
- Obtain radio anti-theft protection code from vehicle owner and record preset radio frequencies before disconnecting battery.
- Place front wheels in straight-ahead position. Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 SECONDS before working on vehicle.
- Disconnect driver-side air bag module Yellow 2-pin connector located under steering column, near combination switch. Air bag connector terminals are automatically shorted together. See Figure.
- Remove glove box door. Remove finish panel from above glove box opening. Remove passenger-side air bag connector from air bag bracket in upper left corner of glove box opening. Unplug passenger-side air bag Yellow 2-pin connector. Air bag connector terminals are automatically shorted together. See Figure and Figure .
- Unplug left and right seat belt pretensioner 2-pin connectors located behind center pillar lower trim plates. Connector terminals are automatically shorted together.