LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1999 >> Swift Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - Self-Diagnostics) >> Circuit Tests >> A-2: Malfunction Indicator Light (Mil) Remains On
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A-2: Malfunction Indicator Light (Mil) Remains On

WARNING: This page is about a different car, the 1999 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

When ignition is on, PCM energizes main relay. As PCM is supplied with ignition power, MIL turns on. After engine starts, MIL will turn off if no malfunction is detected. If a malfunction is detected, MIL will remain on until system is repaired.

  1. Connect scan tool to Data Link Connector (DLC). Attempt to retrieve DTCs with ignition on, engine off. If any DTCs are displayed, see DIAGNOSTIC TESTS  . If no DTCs are displayed, go to next step.
  2. Turn ignition off. Remove PCM cover, located below right side of instrument panel. Disconnect PCM connectors. Turn ignition on. If MIL comes on, repair short to ground in Violet/Yellow wire between MIL bulb and PCM connector. See WIRING DIAGRAMS article. If MIL does not come on, replace PCM. See REMOVAL, OVERHAUL & INSTALLATION article. Retest system.