DTC P0117: Engine Coolant Temperature (ECT) Sensor Circuit Low Input
WARNING: This page is about a different car, the 1999 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Connect scan tool to Data Link Connector (DLC). Turn ignition on. Select ECT sensor parameter on scan tool. If scan tool displays 327°F (164°C), go to next step. If scan tool display is not as specified, check for an intermittent problem. See TROUBLE SHOOTING - NO CODES article.
- Disconnect ECT sensor harness connector. If scan tool display drops to -40°F (-40°C), replace ECT sensor. If scan tool display is not as specified, check Orange/Black wire for short to ground. If wire is okay, replace PCM and retest system.