Rear Wiper/Washer Switch Test

Disconnect rear wiper/washer switch harness connector. Ensure continuity exists across specified switch terminals with switch in appropriate position. See appropriate REAR WIPER/WASHER SWITCH CONTINUITY table. If continuity is not as specified, replace rear wiper/washer switch.

REAR WIPER/WASHER SWITCH CONTINUITY (SWIFT)

Switch Position

⁽¹⁾ Terminal-To-Terminal Wire Colors

Washer Switch OFF

Wiper Switch OFF

ORG & WHT

Wiper Switch ON

YEL & ORG

Washer Switch ON

Wiper Switch OFF

YEL, ORG & GRN

Wiper Switch ON

YEL, ORG & GRN

Indicator Light

RED/GRN & RED/YEL

⁽¹⁾	See appropriate wiring diagram for wire color and terminal identification. See WIRING DIAGRAMS .

REAR WIPER/WASHER SWITCH CONTINUITY (GRAND VITARA & VITARA)

Switch Position

⁽¹⁾⁽²⁾ Terminal-To-Terminal Letter

OFF

"A" & "B"

Rear Wiper ON

"A" & "C"

Rear Washer ON

"A", "C" & "D"

⁽¹⁾	See Fig 1 for terminal identification.

⁽²⁾	See appropriate wiring diagram for wire colors. See WIRING DIAGRAMS .

Fig 1: Identifying Rear Wiper/Washer Switch Connector Terminals (Grand Vitara & Vitara)

Courtesy of SUZUKI OF AMERICA CORP.