Hazard Warning Switch Test

Disconnect hazard warning switch harness connectors. Using an ohmmeter, check continuity between switch terminals with switch in specified position. See appropriate HAZARD WARNING SWITCH CONTINUITY table. If continuity is not as specified, replace hazard warning switch. See HAZARD WARNING SWITCH under REMOVAL & INSTALLATION.

HAZARD WARNING SWITCH CONTINUITY (ESTEEM, GRAND VITARA & VITARA)

Switch Position

⁽¹⁾ Continuity Between Terminals No.

OFF

4 & 5; 6 & 8

1, 2 & 3; 4 & 5; 7 & 8

⁽¹⁾

See Fig 1

HAZARD WARNING SWITCH CONTINUITY (SWIFT)

Switch Position

⁽¹⁾ Terminal-To-Terminal Wire Colors

GRN, GRN/RED & GRN/YEL; WHT/GRN & YEL/BLU

⁽¹⁾	See Figure.

Fig 1: Identifying Hazard Switch Terminals (Esteem, Grand Vitara & Vitara)

Courtesy of SUZUKI OF AMERICA CORP.