Front Wheel Speed Sensor

NOTE: Front wheel speed sensor is serviceable only as an assembly.

REMOVAL
1) Disconnect battery negative cable from battery.
2) Hoist vehicle and remove wheel.
3) Disconnect sensor coupler.





4) Remove front wheel speed sensor from steering knuckle.

INSTALLATION





1) Before installation, check followings:
- Check O-ring for damage and deterioration. Replace if necessary.
- Check to make sure that sensor tooth is free from any metal particles.





2) Install front wheel sensor to steering knuckle.
3) Tighten sensor bolt to specified torque.

Tightening Torque (a): 8 - 12 Nm (0.8 - 1.2 kg m, 6.0 - 8.5 ft. lbs.)

4) Connect sensor coupler securely.
5) Tighten wheel nuts to specified torque and lower hoist.