Diagnostic Procedure
- If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
- If DTCs 19 or 25 are present, perform diagnostic procedure for appropriate DTC.
- Turn ignition off. If air bags have not deployed, go to next step. If air bags have deployed, replace appropriate components. See POST-COLLISION INSPECTION .
- Inspect front of vehicle and undercarriage for signs of impact or damage. If signs of damage are present, replace appropriate components. See POST-COLLISION INSPECTION . If no signs of damage are present, replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM) under REMOVAL & INSTALLATION . Go to next step.
- Reconnect all SIR system components. Using scan tool, clear all SIR DTCs. Go to SIR DIAGNOSTIC SYSTEM CHECK .