Service Precautions

Observe these precautions when working with air bag systems:

• Always disable SRS before performing any air bag repairs. See DISABLING & ACTIVATING AIR BAG SYSTEM .
• Always wear safety glasses and gloves when handling a deployed air bag module and/or seat belt tensioners. Air bag module and/or seat belt tensioners may contain sodium hydroxide deposits, which irritate skin.
• Use caution when handling sensors. Never strike or jar sensors. All sensors and mounting bracket bolts must be tightened carefully to ensure proper sensor operation.
• Never apply power to SRS if any SRS crash sensor is not securely mounted to vehicle.
• Never make any measurement directly on air bag module(s) or seat belt tensioners.
• Remove air bag control module if vehicle repair requires exposing vehicle to temperatures over 176°F (80°C). Never expose air bag system components to hot air or flames.
• Wiring repairs should not be performed on any portion of SRS wiring harness.
• Always handle air bag modules with trim cover away from body. Always place air bag module on workbench with trim cover facing up, away from loose objects.