Steering Lock Replacement (Customer Supplied Only One Or No Valid Keys)
- Replace steering lock. Using new key, turn ignition to ON position, then to LOCK position 5 times. Turn new key to ON position. SECURITY light should be flashing at a 300 millisecond interval. Turn new key to LOCK position and wait about 5 minutes until SECURITY light flashing has decreased to a 1.2 second interval.
- Input code word. See INPUTTING CODE WORD. SECURITY light should stop flashing and stay illuminated. Start engine with new key. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new key to LOCK position and remove key.
- Using new 2nd key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new 2nd key to LOCK position and remove key.
- Repeat step 3) with new 3rd key. Wait 30 seconds, program will quit automatically.
NOTE:
When customer does not supply any valid keys, PCM must also be replaced.