Steering Lock Replacement (Customer Supplied 2 Or More Valid Keys)
- Remove old steering lock. Remove steering lock coil. Install steering lock and steering lock coil. Connect harness connectors.
- Insert valid 1st key into old steering lock. Insert new key into new steering lock. Turn new key to ON position, then to LOCK position 5 times. Turn new key to ON position. SECURITY light should illuminate. Turn new key to LOCK position. SECURITY light should go out.
- Remove valid 1st key from old steering lock. Place valid 2nd key in old steering lock. Using new key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new key to LOCK position.
- Disconnect coil connector from old steering lock and connect to new steering lock. Using new key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn new key to LOCK position and remove key.
- Repeat step 4) with each new key. Wait 30 seconds, program will quit automatically. Complete installation of steering lock.