Hazard Warning Switch
NOTE:
On Swift, hazard warning switch is part of contact coil and combination switch assembly. See CONTACT COIL & COMBINATION SWITCH under REMOVAL & INSTALLATION in STEERING COLUMN SWITCHES article.
Disconnect hazard warning switch harness connectors. Using an ohmmeter, check continuity between switch terminals with switch in specified position. See HAZARD WARNING SWITCH CONTINUITY table. If continuity is not as specified, replace hazard warning switch. See HAZARD WARNING SWITCH under REMOVAL & INSTALLATION.
HAZARD WARNING SWITCH CONTINUITY (ESTEEM, GRAND VITARA & VITARA)
| Switch Position | (1) Continuity Between Terminals No. | ||
|---|---|---|---|
| OFF | 4 & 5; 6 & 8 | ||
| ON | 1, 2 & 3; 4 & 5; 7 & 8 | ||
|
|||