DTC Confirmation Test

Ensure intake air temperature is 6.8-158°F (-14-70°C), vehicle is at an altitude of 9150 feet or below, and barometric pressure is 74 kPa or more. Turn ignition off, connect scan tool and turn ignition on. Clear DTCs. See MALFUNCTION INDICATOR LIGHT (MIL) RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article. Start engine and allow it to idle for 10 seconds. Check for DTC P0112. See RETRIEVING DTCS under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article.