Table C - ABS Lamp Circuit Check, Lamp Flashes With Ignition on

TABLE - C "ABS" WARNING LAMP CIRCUIT CHECK - THE LAMP FLASHES CONTINUOUSLY WHILE IGNITION SWITCH IS ON





CIRCUIT DESCRIPTION
When the diag. switch terminal is shorted or connected to the ground with the ignition switch ON, the diag. trouble code (DTC) is indicated by flashing of the "ABS" warning lamp only in following cases.
^ Normal DTC (12) is indicated if no malfunction DTC is detected in the ABS.
^ A history malfunction DTC is indicated by flashing of the lamp if a current malfunction DTC is not detected at that point although a history malfunction DTC is stored in memory.





INSPECTION