Hazard Warning Switch Test

Disconnect hazard warning switch harness connectors. Using an ohmmeter, check continuity between switch terminals with switch in specified position. See appropriate HAZARD WARNING SWITCH CONTINUITY table. If continuity is not as specified, replace hazard warning switch.

HAZARD WARNING SWITCH CONTINUITY

Switch Position

⁽¹⁾ Terminal-To-Terminal

OFF

4 & 5; 6 & 8

1, 2 & 3; 4 & 5; 7 & 8

⁽¹⁾	See Fig 1 .

HAZARD WARNING SWITCH CONTINUITY

Switch Position

⁽¹⁾ Terminal-To-Terminal (Wire Color)

OFF

YEL & YEL/WHT

WHT/GRN & YEL/WHT; GRN/YEL, GRN & GRN/RED

⁽¹⁾	See Figure or Figure .

HAZARD WARNING SWITCH CONTINUITY

Switch Position

⁽¹⁾ Terminal-To-Terminal (Wire Color)

OFF

GRN/RED & GRN/YEL

GRN, GRN/RED & GRN/YEL; WHT/GRN & YEL/BLU

⁽¹⁾	See Figure or Figure .

Fig 1: Identifying Hazard Switch Terminals (Esteem)

Courtesy of SUZUKI OF AMERICA CORP.