Air Cleaner Housing: Service and Repair

REMOVAL
1. Disconnect negative cable at battery.
2. Disconnect coupler from IAT sensor.
3. Disconnect PCV valve hose from air cleaner lower case.
4. Remove air cleaner assembly with air cleaner hose from throttle body.
Remove air cleaner case nut and bolt, and disconnect air cleaner hose from its pipe and resonator hose.





INSTALLATION
Reverse removal procedure for installation, noting following.
- Before installing, make sure that air cleaner case seal is installed to air cleaner case securely.
- Clamp air cleaner hose and resonator hose securely.