Speedometer Drive With Automatic Transaxle

VEHICLE SPEED SENSOR (VSS)





1. Undo wiring harness clamp.
2. Disconnect Vehicle Speed Sensor (VSS) coupler.
3. Remove VSS bolt.
4. Pull out VSS by gripping sensor body.
5. For installing, reverse removal procedure.

NOTE: Check to be sure that O ring is in good condition.

Tightening Torque
(a): 7 - 9 Nm (0.7 - 0.9 kg-m, 5.5 - 6.5 ft. lbs.)