Brake Rotor/Disc: Service and Repair

REMOVAL
1) Hoist vehicle and remove wheel.





2) Remove caliper assembly by loosening carrier bolts (2 pieces).

CAUTION: During removal, be careful not to damage brake flexible hose and not to depress brake pedal.






3) Remove brake disc screws (2 pieces).





4) Pull brake disc off by using 8 mm bolts (2 pieces).

INSTALLATION

NOTE: See service precautions.

1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.





3) Torque caliper carrier bolts to specification.

Tightening Torque
(a): 40 - 60 Nm (4.0 - 6.0 kg m, 29.0 - 43.0 ft. lbs.)






4) Torque front wheel nuts to specification.
5) Upon completion of installation, perform brake test.