Adapter Case (4WD Model) or Extension Case (2WD Model)

ADAPTER CASE (4WD MODEL) OR EXTENSION CASE (2WD MODEL)





1. Remove parking lock pawl and return spring, and check them for wear. If they are excessively worn, replace with new parts.





2. If leakage exists in oil seal or its lip is excessively hardened, replace with a new one. When installing it, hold case to float parking lock pawl pin, and drive it in with special tool and hammer as far as case surface. Then apply small amount of grease to its lip which faces front.

Special Tool
(A): 09913-75520