Power Door Lock Switch Test

Remove power door lock switch from driver's door panel. Using an ohmmeter, check continuity between appropriate switch terminals. See appropriate DOOR LOCK SWITCH CONTINUITY TEST table. See Fig 1 , Fig 2 , Fig 3 or Fig 4 . If continuity is not as specified, replace power door lock switch.

DOOR LOCK SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals No.

Lock

3 & 4

Off

⁽¹⁾

Unlock

2 & 3

⁽¹⁾	Continuity should not exist between any terminals.

DOOR LOCK SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals No.

Lock

1 & 9

Off

⁽¹⁾

Unlock

2 & 9

⁽¹⁾	Continuity should not exist between any terminals.

DOOR LOCK SWITCH CONTINUITY TEST

Switch Position

Continuity Between Terminals No.

Lock

1 & 2

Off

⁽¹⁾

Unlock

1 & 3

⁽¹⁾	Continuity should not exist between any terminals.

Fig 1: Door Lock Switch Terminals (Esteem)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Door Lock Switch Terminals (Sidekick 4-Door & X90)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Door Lock Switch Terminals (Sidekick 2-Door)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 4: Door Lock Switch Terminals (Swift)

Courtesy of SUZUKI OF AMERICA CORP.