Rear Wiper/Washer Switch Test
Disconnect rear wiper/washer switch harness connector. Ensure continuity exists across specified switch terminals with switch in appropriate position. See REAR WIPER/WASHER SWITCH CONTINUITY table. If continuity does not exist, replace rear wiper/washer switch.
REAR WIPER/WASHER SWITCH CONTINUITY
| Switch Position |
Terminal-To-Terminal (Wire Color) |
| Washer Switch OFF |
| Wiper Switch OFF |
ORG & BLK/RED |
| Wiper Switch ON |
YEL/RED & BLK/RED |
| Washer Switch ON |
| Wiper Switch OFF |
BLK/YEL & YEL/RED |
| Wiper Switch ON |
BLK/YEL & YEL/RED |
| Indicator Light |
RED/BLK & RED/YEL |
REAR WIPER/WASHER SWITCH CONTINUITY
| Switch Position |
Terminal-To-Terminal (Wire Color) |
| Washer Switch OFF |
| Wiper Switch OFF |
ORG & BLU/GRN |
| Wiper Switch ON |
ORG & YEL/BLU |
| Washer Switch ON |
| Wiper Switch OFF |
ORG, YEL/BLU & BLK/GRN |
| Wiper Switch ON |
ORG, YEL/BLU & BLK/GRN |
| Indicator Light |
RED/GRN & RED/YEL |