LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1998 >> Sidekick JS, 4D Utility, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Steering Wheel >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Wheel: Installation

  1. Center contact coil by gently turning contact coil cover counterclockwise until it stops. Turn contact coil cover clockwise 2 1/2 turns and align alignment arrows on contact coil cover and housing.
  2. Install steering wheel on steering shaft paying attention to alignment marks and with 2 contact coil lugs fitting into grooves on back of steering wheel. Tighten steering wheel nut to specification. See TORQUE SPECIFICATIONS  . Tighten air bag module bolts to specification.
  3. To complete installation, reverse removal procedure. Connect driver's side and passenger's side Yellow air bag connectors. Reinstall AIR BAG fuse. Turn ignition on and ensure AIR BAG warning light flashes 7 times then turns off. If AIR BAG warning light does not operate as described, see AIR BAG RESTRAINT SYSTEMS article.
Fig 1: Using Puller To Remove Steering Wheel
G90E01285Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Steering Wheel-To-Steering Shaft Alignment Marks
G90G01286Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals