LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1998 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> SANDEN 7 Cylinder >> Shaft Seal >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shaft Seal: Installation

  1. Using refrigerant oil, lubricate Shaft Seal Protector (09990-58240) and install over compressor shaft. Using refrigerant oil, lubricate shaft seal lips and outer "O" ring. Install shaft seal over protector with "O" ring toward compressor. Ensure lips of shaft seal point toward compressor.
  2. Using Seal Remover/Installer (09990-48230) and hand pressure, slowly install shaft seal until upper face of seal is lower than snap ring groove. Install snap ring with chamfered side facing compressor. Install NEW shaft key and felt ring. To complete installation, reverse removal procedure.
Fig 1: Exploded View Of Compressor (Sanden SD7B10 7-Cyl.)
G95F60843Courtesy of SUZUKI OF AMERICA, CORP.
scientia non olet · About LEMON Manuals