Service Precautions

Observe these precautions when working with air bag systems:

• Before disconnecting battery cable(s) and disabling air bag system, obtain radio security code from vehicle owner.
• DO NOT  use a computer memory saver tool. Using computer memory saver tool will keep air bag system active and may cause accidental deployment of air bag.
• Disable air bag system before servicing any air bag system or steering column component. See DISABLING AIR BAG SYSTEM .
• Because of critical operating requirements of system, DO NOT  attempt to service any air bag system component.
• Air bag parts should not be left unattended. They should be installed in vehicle immediately after obtaining them.
• Air bag components which have been dropped more than 20 inches should not be used.
• DO NOT  expose air bag system components to temperatures greater than 212°F (100°C).
• Chemical cleaners, oil and grease should not contact vinyl covering on air bag.
• DO NOT  place stickers or covers on steering wheel.
• Always disable air bag system before performing electric welding on vehicle.