Ignition Switch & Column Lock: Installation
- Line up oblong hole of steering shaft with center of steering column hole. Turn ignition switch to ACC or ON position and install steering lock assembly onto column.
- Turn ignition key to LOCK position and remove key. Align hub on lock with oblong hole of steering shaft and rotate shaft to ensure steering shaft is locked. See Fig 1
and Fig 2
.
- Install 2 NEW shear bolts. Tighten each bolt until head breaks off. Turn ignition key to ACC or ON position and rotate steering shaft, ensuring smooth movement. Check lock for proper operation. Install steering column and steering wheel.
Courtesy of SUZUKI OF AMERICA CORP.
Courtesy of SUZUKI OF AMERICA CORP.