Transmission Range Switch (A/T)
NOTE:
Transmission range switch may also be referred to as park/neutral position switch or shift switch.
- Apply parking brake. Disconnect transmission range switch harness connector, located on side of transmission. See Figure .
- Check continuity between specified terminals at transmission range switch with shift lever in specified positions. See TRANSMISSION RANGE SWITCH SPECIFICATIONS table. See Fig 1 or Fig 2 . If continuity is not as specified, adjust or replace transmission range switch as necessary.
TRANSMISSION RANGE SWITCH SPECIFICATIONS
| Application & Shift Lever Position | Continuity Between Terminals No. |
|---|---|
| Park | 5 & 6; 8 & 9 |
| Reverse | 1 & 8 |
| Neutral | 5 & 6; 8 & 10 |
| Drive | 2 & 8 |
| 2 | 3 & 8 |
| Low | 4 & 8 |
TRANSMISSION RANGE SWITCH SPECIFICATIONS
| Application & Shift Lever Position | Continuity Between Terminals No. |
|---|---|
| Park | 2 & 3; 6 & 7 |
| Reverse | 6 & 8 |
| Neutral | 2 & 3; 6 & 10 |
| Drive | 6 & 9 |
| 2 | 4 & 6 |
| Low | 5 & 6 |
TRANSMISSION RANGE SWITCH SPECIFICATIONS
| Application & Shift Lever Position | Continuity Between Terminals No. |
|---|---|
| Park | 8 & 9 |
| Reverse | 1 & 8 |
| Neutral | 8 & 10 |
| Drive | 2 & 8 |
| 2 | 3 & 8 |
| Low | 4 & 8 |