LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1998 >> Sidekick JS Sport >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.3L & 1.6L 4-CYL VINS [0,3]) >> Overhaul >> Cylinder Block Assembly >> Thrust Bearing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Thrust Bearing

WARNING: This page is about a different variant/trim than selected.
  1. With crankshaft bearing caps installed, check thrust clearance (end play) using dial gauge to read displacement in axial thrust direction of crankshaft.
  2. Standard thickness of thrust bearing is .0984" (2.50 mm). Oversize thrust bearings are available in increments of .0049" (.125 mm). If clearance exceeds specification, replace thrust bearing. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals