Compressor & Condenser Fan Relays
WARNING: This page is about a different car, the 1997 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
- Remove relay. Using an ohmmeter, check continuity between relay terminals. Continuity should exist between terminals No. 1 and 2, but not between terminals No. 3 and 4. See Fig 1 .
- Connect battery voltage to terminal No. 1, and ground terminal No. 2. Ensure continuity now exists between terminals No. 3 and 4. If continuity is not as specified, replace relay.