Neutral Safety Switch: Adjustments
TRANSMISSION RANGE SWITCHADJUSTMENT
1. Shift manual shift lever to "N" range.
2. Connect ohmmeter between (7) and (9) terminals of disconnected transmission range switch coupler.
3. Turn transmission range switch gradually to find position where ohmmeter reading indicates continuity.
Then fix transmission range switch at that position by tightening bolts to specified torque.
Tightening Torque (a): 20 Nm (2.0- kg-m, 14.5 ft. lbs.)
4. Connect transmission range switch coupler.
5. Check that engine starts in "N" and "P" ranges but it doesn't start in "D", "2", "L" or "R" range. Also, check that back-up lights turn ON in "R" range.
INSPECTION
1. Disconnect transmission range switch coupler.
2. Check that continuity exists as shown by moving selector lever.