LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1997 >> Swift Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul - M58 & M42 5-Speed >> Component Disassembly & Reassembly >> Input Shaft Assembly >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shaft Assembly: Reassembly

  1. Apply transmission assembly lubricant to all parts. Press on RH bearing. Install 3rd and 4th gear needle bearing, apply oil and install 3rd gear and synchronizer ring.
  2. Install high speed sleeve and hub assembly. Ensure synchronizer ring slots are aligned with keys in sleeve and hub assembly. Check for free rotation of 3rd gear.
  3. Install snap ring. Ensure snap ring is securely installed in groove. Install needle bearing, apply oil and install synchronizer ring and 4th gear. Using Bearing Installer (Geo J-34844, Suzuki 09925-98221), drive on LH bearing and 5th gear spacer.
scientia non olet · About LEMON Manuals