Power Rack & Pinion: Removal
- From inside vehicle, loosen but do not remove, steering shaft upper "U" joint pinch bolt. Remove steering shaft lower "U" joint pinch bolt. Separate lower "U" joint from steering gear pinion shaft.
- Raise and support front of vehicle. Remove front wheels. Using Tie Rod End Remover (09913-65210), separate tie rod ends from steering knuckles. Remove exhaust pipe as necessary. On A/T models, remove engine rear torque rod and bracket. On M/T models, disconnect transmission side of gear shift control shaft and extension rod.
- On all models, remove and plug pressure and return lines from rack and pinion assembly. Remove rack and pinion assembly mounting bolts. Remove rack and pinion assembly from vehicle.