Left Case

1. If input oil gutter has been removed, install it with bolt applied with thread lock cement.
"A": Thread lock 1322, or equivalent.
Tightening Torque (a): 8 - 12 Nm (72 - 102 inch lbs.).





2. Install differential side L oil seal until it becomes flush with case surface by using special tool (A): 09913-75510 or equivalent, with hammer, and then apply grease to its lip.
"B": SUZUKI SUPER GREASE A, or equivalent.

NOTE: Face oil seal spring side inward.

3. Install countershaft L bearing cup into case bore by tapping it with plastic hammer lightly.