Clutch Assembly: Inspection
- Check wear on clutch disc facings by measuring depth of each rivet head. Minimum depth at any rivet is .02" (.5 mm). Replace clutch disc if not within specification.
- Check diaphragm spring and pressure plate for wear or damage. Replace pressure plate assembly if excessively worn or damaged. Check pilot bearing rotation. Replace bearing if roughness is felt. Inspect flywheel runout.
- Clean flywheel and pressure plate of all oil, grease, and metal deposits. Inspect for damage, cracks or warpage. Slight surface scoring can be removed with sandpaper. Replace or repair as necessary.