Front Wiper/Washer Switch

Disconnect front wiper/washer switch harness connector. Ensure continuity exists across specified switch terminals with switch in appropriate position. See FRONT WIPER/WASHER SWITCH CONTINUITY . If continuity does not exist, replace multifunction switch.

FRONT WIPER/WASHER SWITCH CONTINUITY

Switch Position

⁽¹⁾ Terminal-To-Terminal (Wire Color)

OFF

⁽²⁾

INT

⁽²⁾⁽³⁾

LOW Speed

BLU & YEL/BLU

HIGH Speed

YEL/BLU & BLU/RED

WASHER ON

YEL/BLU & BLU/BLK

⁽¹⁾	See appropriate wiring diagram for wire color and terminal identification. See WIRING DIAGRAMS .

⁽²⁾	Information is not available from manufacturer at time of publication.

⁽³⁾	Test intermittent wiper relay. See INTERMITTENT WIPER RELAY TEST .