Vehicle Speed Sensor Circuit Check

Ensure ignition is off. Disconnect harness connector at CC ECU.
NOTE: A break in step numbering sequence occurs at this point. Procedure skips from step 1) to step 3). No test procedures have been omitted.
Check continuity between CC ECU terminal No. 11 (Yellow wire) between CC ECU and instrument cluster harness connector. See appropriate wiring diagram under WIRING DIAGRAMS .
Continuity should exist. If no continuity exists, check wiring and harness connectors. Repair wiring or harness connectors as necessary.
If continuity exists, check vehicle speed sensor. See VEHICLE SPEED SENSOR TEST under COMPONENT TESTS.